Explain Star Network Topology With Advantages and Disadvantages

Topic: Explain the Working Star Network Topology With Advantages and Disadvantages

Star Topology

Star Topology is the most popular and widely used network topology in local area networks. In star topology, all computers are connected with a central device known as HUB or Switch. Now-a-days Hubs are often replaced by Fast Network Switches.

The working of Star Topology

The sender computer sends data to the hub. The hub sends it to the destination computer. So, all data communication is managed through HUB or Switch.
In a star network, each node (file server, workstations, and peripherals) is
connected to a central device called a hub. The hub takes a signal that comes from any node and passes it along to all the other nodes in the network.
The star topology reduces the chance of network failure by connecting
all of the systems to a central node.

Explain Star Network Topology With Advantages and Disadvantages

What is Star topology? Advantages and Disadvantages of star topology

Note: The major difference between a Networking Hub and Networking Switch is that HUB sends data to all computers, and the destination computer will accept it while other computers will not. On the other hand, Switch sends data only to the destination computer. Therefore, switch can reduce network traffic and hence provides fast transmission speed.

working Advantages disadvantages and diagram of Star Topology

Advantages of Star Network Topology

1. Star Network Topology Supports Easy Installation and maintenance

It is easy to maintain network. That is why it is so popular.

2. Star Topology Supports Adding or removing computers easily

Adding or removing computers can be done without disturbing the network. We connect the new computer with the HUB by means of a networking cable. One end of the cable (RJ 45 connector) is inserted in computer’s Network Interface Card and the other end (RJ 45 connector) is plugged into the HUB, and that’s it.

3. Star Topology for Easy Fault Diagnosis

In a star network topology, finding faults is easy. If a computer is no more connected with your network, you can check its cable and connectors or network settings in its Operating system.

4. Star Network Topology Supports Network Reliability

Single computer failure will not disturb whole network, since all other computers are connected with separate links ( wires ) to HUB. Definitely, they will work fine. Therefore, only the faulty computer will not be able to communicate with other computers in the Local Area Network.

5. Star Network Topology for Better performance

Star topology can prevents the passing of data through an excessive number of nodes. By using a Switch, at most, 3 devices and 2 links are involved in any communication between any two devices.
6. Device Isolation
Each device is separately connected to HUB or Switch and is isolated. This is why each device works independently.

Disadvantages of Star Network Topology

1. Failure of central HUB in Star Topology

In star network topology, data communication depends on HUB. If central hub fails, then whole network fails.

2. A Lot of Cable is required in Star Topology

Since each computer will be connected with HUB by means of a separate networking wire, star network topology needs more communication cable to connect computers.

3. Star Topology is More Expensive

It is more expensive due to more wires. Since every node in a star network topology is connected with HUB through a separate networking wire, therefore, a lot of wires are needed for constructing and maintaining a star network topology

Read More on Networking and Networks
1	Explain Advantages Of Networks
2	Types Of Computer Networks
3	Differences between LAN and WAN
4	Types Of Network Topology
5	Bus Topology :Advantages and Disadvantages
6	Advantages and Disadvantages of Star Topology
7	Advantages and Disadvantages of Ring Network Topology
8	Advantages and Disadvantages of Tree Topology
9	Advantages and Disadvantages of Mesh Topology

Topic: Explain the Working Star Network Topology With Advantages and Disadvantages

Explain different types of storage devices

Topic: Explain different types of storage devices in Computer systems Storage Devices Storage devices are used to store data and instructions permanently. Storage devices are also called secondary storage devices / backing storage devices / external storage devices or auxiliary storage devices. Examples of storage devices include Hard Disk, CD and DVD etc. Why Secondary Storage Devices are Used? Secondary storage devices are used because: Primary memory(RAM) is volatile and temporary. When computer is switched off, all data in ram is erased. Storage devices can store large amounts of data and instructions permanently whereas Primary memory has less capacity of storing data. Types Of Storage Devices There are three main types of storage devices: Magnetic Tape Magnetic Disk Optical Disk Flash Memory storage devices 1. Magnetic Tape Magnetic tape is the oldest storage device. It is made of plastic coated with magnetic material. Data is stored on mag

Important Objective Type Questions 101-155

MMC stands for multimedia card. SD stands for secure digital card. System Bus is used to connect main components of a computer such as cpu and main memory. A Port is an interface or a point of attachments. POS stands for Point Of Sale terminal. ATM stands for Automated Teller Machine. PIN stands for Personal identification number. Kbps stands for kilobits per second. Mbps stands for megabits per second. A port that transmits one bit at a time is called Serial Port. A type of port that transmits many bits at a time is called Parallel Port. LPT stands for Line Printer. Examples of system software are Operating System, Utility Programs and Device Drivers. Examples of operating systems are DOS, Windows, Unix and Linux. Examples of Utility programs are File Manager, Image Viewer, Disk Scanner and File Compressor. Software used to detect and remove viruses is called Antivirus . Examples of antivirus programs are Mcaffee, Avast,

Convert Centimeters to Inches Python Programming | Python Program Conver...

YouTube Video Tutorial How to write a Python program to convert centimetres to inches Formula to convert centimetres to inches Explanation of this Python Program This Python program prompts the user to enter a height in inches, converts it to centimeters, and then prints the converted value. It uses the conversion factor of 2.54 to perform the conversion and rounds the result to two decimal places before displaying it to the user. Here's an explanation of the provided Python program line by line: python inches = float ( input ( 'Enter the Height in inches to convert into centimeters:' )) This line prompts the user to enter a height in inches and assigns the entered value to the variable inches . The input() function is used to receive input from the user, and float() is used to convert the input into a floating-point number. python centimeters = inches * 2.54 This line calculates the equivalent value in centimeters by multiplying the inches variable by the conver

Perfect Computer Notes

Search This Blog